GV FAE Knowledge

Article ID: GV3-22-04-06-A
Release Date: April 6, 2022

Applied to
GV-IP Cameras & UA-IP Cameras::

• GV-ABL / TBL Series

• GV-ADR / TDR Series

• GV-AVD / TVD Series

• GV-BLFC5800

• GV-BX2802 / 4802

• GV-EBD Series

• GV-EBFC5800

• GV-FER5702

• GV-PBL8800

• GV-PDR8800

• GV-PTZ5810-IR

• GV-SD2322-IR / SD2722-IR / SD3732-IR / SD4825-IR / SD4834-IR

• UA-B20004F / B40004F / B4000VF-S

• UA-D20002F / D40002F / D4000VF-S

• UA-R40002F-SA

Other UA-IP Cameras:

• UA-B580F3

• UA-R500F2 / R560F2 / R580F2 / R800F2

UA-SNVR:

• UA-SNVRL810-P (earlier than V1.10)

• UA-SNVR1620-P (earlier than V1.10)

UA-HD DVR:

• UA-XVL810 / XVL1610 (earlier than V1.10)

• UA-XVR810 (earlier than V1.10)

Introduction
This document illustrates detailed instructions for connecting the abovementioned IP cameras on UA-HD DVR / SNVR.

Manually connecting IP cameras

1. On UA-HD DVR / SNVR, select Remote Setting > Channel > IP Channels. Click the Add button.

   

   01.jpg (58.55 KiB) Viewed 12347 times

2. Fill in the following information on the popup window:
   • Type IP Address of the camera
   • For Port, type 80 for GV-IP Cameras & UA-IP Cameras and 9000 for Other UA-IP Cameras
   • For Protocol, select ONVIF for GV-IP Cameras & UA-IP Cameras and Private for Other UA-IP Cameras
   • Type ID (Username) and Password of the camera

   

   02.png (686.81 KiB) Viewed 12347 times

3. Click OK.

Automatically connecting IP cameras

1. On UA-HD DVR / SNVR, select Remote Setting > Channel > IP Channels. Click Quick Add. IP cameras under the same LAN appear.

   

   03.png (55.71 KiB) Viewed 12347 times

2. Select the camera you wish to connect and type the ID (Username) and Password.

   

   04.png (833.94 KiB) Viewed 12347 times

3. Click Add.