[Technical Notice] How to Adjust Focus for GV-IP Camera with P-Iris
Posted: August 23rd, 2018, 4:33 pm
Article ID: GV3-17-07-26-HY
Released Date: 07/26/2017
Applied to
GV-IP Camera with P-Iris
Changing the Auto Iris Setting for Focal Adjustment
To adjust the focus of the P-Iris models, disable the Auto Iris function in advance and follow the instructions below to achieve optimal image quality.
Adjusting the focus while the P-Iris is on causes blurry camera images later when the illumination decreases, especially if the focal adjustment had not been done properly.
Released Date: 07/26/2017
Applied to
GV-IP Camera with P-Iris
Changing the Auto Iris Setting for Focal Adjustment
To adjust the focus of the P-Iris models, disable the Auto Iris function in advance and follow the instructions below to achieve optimal image quality.
Adjusting the focus while the P-Iris is on causes blurry camera images later when the illumination decreases, especially if the focal adjustment had not been done properly.
- Screenshot_4.jpg (13.11 KiB) Viewed 1740 times
- Log onto the Web interface of the GV-IP Camera.
- In the left menu, select Streaming 1 under Video Settings and disable the Auto Iris function. Click Apply.
- Screenshot_3.jpg (6.63 KiB) Viewed 1740 times
- Adjust the camera focus as needed while the P-Iris remains disabled.
- Enable the Auto Iris function again once you finish adjusting the camera.
- Screenshot_2.jpg (18.83 KiB) Viewed 1740 times
- A dialogue box appears once you select Enable. Click OK.
- Screenshot_1.jpg (62.74 KiB) Viewed 1740 times