[ AS Hardware ] New Tag (TID) not working with my RFID reader? - 20180705
Posted: July 5th, 2018, 2:46 pm
Question:
My tag is not working with my AS1520 controller, what should I check?
Solution:
The tag type is defined as TID and therefore AS1520 needs to be configured.
1. Please login into the AS1520 interface and change the setup of Function Configuration:
2. once you confirmed the setup is done(close window and relogin again to confirm)
Be sure you power unplug to power on again to reboot(no software reboot)
if you wish to add one card, you can right click at this invaild card event and select add/edit cards:
PS: if you are testing, be sure you set the Input to Disable to make the AS1520 read the tag without checking input sensor.
My tag is not working with my AS1520 controller, what should I check?
- 2018-07-05_14h34_40.jpg (16.55 KiB) Viewed 2955 times
The tag type is defined as TID and therefore AS1520 needs to be configured.
1. Please login into the AS1520 interface and change the setup of Function Configuration:
- 2018-07-05_14h40_22.jpg (93.05 KiB) Viewed 2955 times
Be sure you power unplug to power on again to reboot(no software reboot)
- 2018-07-05_14h41_35.jpg (114.89 KiB) Viewed 2955 times
- 2018-07-05_14h46_01.jpg (46.32 KiB) Viewed 2955 times
- 2018-07-05_14h45_27.jpg (47.62 KiB) Viewed 2955 times