[ AS Hardware ] New Tag (TID) not working with my RFID reader? - 20180705

[support]

Question:

My tag is not working with my AS1520 controller, what should I check?

2018-07-05_14h34_40.jpg (16.55 KiB) Viewed 2953 times

Solution:
The tag type is defined as TID and therefore AS1520 needs to be configured.

1. Please login into the AS1520 interface and change the setup of Function Configuration:

2018-07-05_14h40_22.jpg (93.05 KiB) Viewed 2953 times

2. once you confirmed the setup is done(close window and relogin again to confirm)
Be sure you power unplug to power on again to reboot(no software reboot)

2018-07-05_14h41_35.jpg (114.89 KiB) Viewed 2953 times

if you wish to add one card, you can right click at this invaild card event and select add/edit cards:

2018-07-05_14h46_01.jpg (46.32 KiB) Viewed 2953 times

PS: if you are testing, be sure you set the Input to Disable to make the AS1520 read the tag without checking input sensor.

2018-07-05_14h45_27.jpg (47.62 KiB) Viewed 2953 times