[ VMS ] VMS v16.11, GV-BL3411 F/W v3.03, 3.10, GV-Eye v2.4, GV-Eye is unable auto focus BL3411 via VMS - 20170930
Posted: September 30th, 2017, 5:43 pm
Issue:
VMS v16.11, GV-BL3411 F/W v3.03, 3.10, GV-Eye v2.4, GV-Eye is unable auto focus BL3411 via VMS
Root Cause:
The Focus command only gives Start without Stop. Therefore, Auto Focus does not work properly. Since the related command is given by DMIPCServer, WebCam, Control Center, ERM, GV-Eye has the same issue when connected to VMS to operate the Motorized Camera.
Patch / Procedure ( GV-VMS_16.11.0.007.zip ):
1. Close VMS v16.11 and related programs
2. Unzip and run the following file
- GV-VMS_V16.11.0.007.exe
3. Restart VMS.
Note: Only for VMS v16.11, and this issue will also be fixed in GV-VMS v17.1
Reference:
[ HQ – 201708107004 ] GV-ASNotify, d3dx9_40.dll Error
VMS v16.11, GV-BL3411 F/W v3.03, 3.10, GV-Eye v2.4, GV-Eye is unable auto focus BL3411 via VMS
Root Cause:
The Focus command only gives Start without Stop. Therefore, Auto Focus does not work properly. Since the related command is given by DMIPCServer, WebCam, Control Center, ERM, GV-Eye has the same issue when connected to VMS to operate the Motorized Camera.
Patch / Procedure ( GV-VMS_16.11.0.007.zip ):
1. Close VMS v16.11 and related programs
2. Unzip and run the following file
- GV-VMS_V16.11.0.007.exe
3. Restart VMS.
Note: Only for VMS v16.11, and this issue will also be fixed in GV-VMS v17.1
Reference:
[ HQ – 201708107004 ] GV-ASNotify, d3dx9_40.dll Error