[ IP Camera ] Possible causes for Bullet camera getting water damaged - 20170603
Posted: June 3rd, 2017, 3:40 pm
Apply to:
Outdoor Bullet cameras
Issue:
Water/rain leaks through Bullet camera casing, causing water damage.
Causes & Solution:
In a lot of cases, water damage is caused by the following reasons:
- Silica gel not been replaced, after opening the lens cover.
- Cable connection point not been wrapped around with waterproof tape.
- Cable not been properly positioned.
Also, please pay attention to below.
Outdoor Bullet cameras
Issue:
Water/rain leaks through Bullet camera casing, causing water damage.
Causes & Solution:
In a lot of cases, water damage is caused by the following reasons:
- Silica gel not been replaced, after opening the lens cover.
- 1.jpg (27.23 KiB) Viewed 2609 times
- Cable not been properly positioned.
- 2.jpg (43.43 KiB) Viewed 2609 times
- 3.jpg (16.88 KiB) Viewed 2609 times
Also, please pay attention to below.
- 4.jpg (33.51 KiB) Viewed 2609 times