[ IP Camera ] Possible causes for Bullet camera getting water damaged - 20170603

[ThomasLee]

Apply to:
Outdoor Bullet cameras

Issue:
Water/rain leaks through Bullet camera casing, causing water damage.

Causes & Solution:
In a lot of cases, water damage is caused by the following reasons:

- Silica gel not been replaced, after opening the lens cover.

1.jpg (27.23 KiB) Viewed 2607 times

- Cable connection point not been wrapped around with waterproof tape.

- Cable not been properly positioned.

2.jpg (43.43 KiB) Viewed 2607 times

3.jpg (16.88 KiB) Viewed 2607 times

Also, please pay attention to below.

4.jpg (33.51 KiB) Viewed 2607 times