[Technical Notice] Connecting to UA-HD DVR or UA-SNVR on GV-IP Decoder Box Ultra through RTSP

USA Vision Line SNVR / DVR technical notice
Post Reply
amber
Posts: 29
Joined: September 24th, 2021, 5:06 pm

[Technical Notice] Connecting to UA-HD DVR or UA-SNVR on GV-IP Decoder Box Ultra through RTSP

Post by amber »


Article ID: GV5-22-09-30-A
Release Date: September 30, 2022


Applied to
UA-HD DVR
  • UA-XVL810 (V1.10 or later)
  • UA-XVL1610 (V1.10 or later)
  • UA-XVR810 (V1.10 or later)
  • UA-XVR1620 (V1.00 or later)
UA-SNVR
  • UA-SNVRL810-P (V1.10 or later)
  • UA-SNVR1620-P (V1.10 or later)
Introduction
This document illustrates detailed instructions for connecting to UA-HD DVR or UA-SNVR on GV-IP Decoder Box Ultra through RTSP to provide users with the optimal video surveillance solution.

Instruction
To connect to UA-HD DVR or UA-SNVR on GV-IP Decoder Box Ultra through RTSP, follow the steps below:

On UA-HD DVR or UA-SNVR
  1. To enable RTSP connection on UA-HD DVR or UA-SNVR, select Network > Platform Access > Enableon the Web interface.
    01.png
    01.png (67.65 KiB) Viewed 272 times
  2. Create the authorized username and password for RTSP connection and click Save.

On GV-IP Decoder Box Ultra
  1. Select Camera Search > Add Camera. This dialogue box appears.
    02.jpg
    02.jpg (38.17 KiB) Viewed 272 times
  2. Name the device in the field of Camera Name.
  3. Under Login Information, type the authorized username and password created on UA-HD DVR or UA-SNVR at Step 2.
  4. Select the desired stream mode on the drop-down list of Stream Mode. It is suggested to select Dual Stream in case of multiple division display on GV-IP Decoder Box Ultra.
  5. On the drop-down list of Protocol, select RTSP over TCP.
  6. In case of single stream, type one of the following commands in the field of RTSP Command:
    • For main stream display: rtsp://IP address:port/rtsp/streaming?channel=xx&subtype=0
    • For sub stream display: rtsp://IP address:port/rtsp/streaming?channel=xx&subtype=1
  7. In case of dual stream, type the following commands:
    • In the field of RTSP Command: rtsp://IP address:port/rtsp/streaming?channel=xx&subtype=0
    • In the field of RTSP Command2: rtsp://IP address:port/rtsp/streaming?channel=xx&subtype=1
Post Reply