[ AS Hardware ] How to distinguish the max. event log is 50000(FR Panel-5) or 100000(FR Panel-10)? from FR Panel.

Controllers, Readers, Accessories
Post Reply
sho
Posts: 3
Joined: January 29th, 2015, 8:31 am

[ AS Hardware ] How to distinguish the max. event log is 50000(FR Panel-5) or 100000(FR Panel-10)? from FR Panel.

Post by sho »

Applied to
GV-FR Panel V1.2.0 or later

Introduction
How to distinguish the max. event log is 50000(FR Panel-5) or 100000(FR Panel-10)? from FR Panel.

Solution
You may check it by the following ways:

1. From material numbers or barcode.
bard code.jpg
bard code.jpg (44.06 KiB) Viewed 656 times

2. From FR panel host device: you may check the FW ver. to see if it's FR Panel-5 or FR Panel-10.
host device.jpg
host device.jpg (28.24 KiB) Viewed 700 times

3. From IP Device Utility NOTE to see if it's FR Panel-5 or FR Panel-10.
IP Device Utility.jpg
IP Device Utility.jpg (44.81 KiB) Viewed 700 times
Post Reply