Search found 43 matches

by Faga
December 4th, 2020, 11:19 am
Forum: GV-DVR/NVR V8.9
Topic: [ NVR ] A/T and EBD series Camera Relay Mode Bistable and Monostable with NVR I/O, IP Camera Install – 20201123
Replies: 0
Views: 1530

[ NVR ] A/T and EBD series Camera Relay Mode Bistable and Monostable with NVR I/O, IP Camera Install – 20201123

Issue: NVR v8.9.1 and former connect to A/T and EBD series model with I/O. After close IP Camera Install or other UI modification, I/O will be triggered. Answer: Access to your Camera Web Page and change Relay Mode to Bistable(default is Monostable) for test. 001.png Reference: [ 3rd Eye Surveillan...
by Faga
November 25th, 2020, 5:02 pm
Forum: GV-VMS v17.4
Topic: [ VMS ] v17.4/v18.2 Unknown Disk: ‘D:\’, HDD - 20201123
Replies: 0
Views: 1455

[ VMS ] v17.4/v18.2 Unknown Disk: ‘D:\’, HDD - 20201123

Issue: VMS v17.4/v18.2 will have Unknown Disk when mouse stay on the HDD. 003.PNG Answer: 1. If you use not local HDD e.g., iSCSI or Network disk, please update to VMS v17.4.1/v18.2.1 or above. 2. If you use local HDD, please check your HDD health status first such as using HD Tune or CrystalDiskIn...
by Faga
November 18th, 2020, 9:37 am
Forum: Control Center
Topic: [ Control Center ] v3.8 CPU increases with several Fisheye Dewarping Cameras at Matrix full screen (F key) - 20201117
Replies: 0
Views: 1679

[ Control Center ] v3.8 CPU increases with several Fisheye Dewarping Cameras at Matrix full screen (F key) - 20201117

Issue: Control Center v3.8 CPU increases considerably with several Fisheye Dewarping Cameras at Matrix full screen mode (F key). Here you can see before Matrix full screen mode (F key), Fisheye Dewarping channels are second stream. 001.PNG After enable Matrix full screen mode (F key), Fisheye Dewar...
by Faga
November 10th, 2020, 2:53 pm
Forum: Recording Server
Topic: [ Recording Server ] GeoVision IP Camera active to connect to Recording Server – 20201106
Replies: 0
Views: 1239

[ Recording Server ] GeoVision IP Camera active to connect to Recording Server – 20201106

Question: Can Recording Server support passive connection to A/T series and EBD cameras? * Passive connection means type Recording Server's information ( IP address/ID/Passwords ) via A/T series and EBD cameras's IE setting in order to establish a connection with a Recording Server. Answer: No, it ...
by Faga
October 15th, 2020, 10:39 am
Forum: IP cameras
Topic: [ IP Camera ] VMS and NVR support Auto Tracking for QSD Cameras - 20201014
Replies: 0
Views: 1732

[ IP Camera ] VMS and NVR support Auto Tracking for QSD Cameras - 20201014

Question: Does VMS or NVR support QSD Cameras for Auto Tracking? Answer: VMS v17.4 and NVR v8.9 support only Start/Stop Auto Tracking. However, you should set up the configuration at QSD Camera Web Page first as below. 擷取.PNG Reference: [ UVS - 202010084002 ] QSD support Auto Tracking at NVR or VMS
by Faga
August 25th, 2020, 6:49 pm
Forum: GV-VMS v17.3
Topic: [ VMS ] VMS, DVR/NVR and ERM Password Rule, Special Symbols - 20200825
Replies: 0
Views: 1636

[ VMS ] VMS, DVR/NVR and ERM Password Rule, Special Symbols - 20200825

Question:
What is the Password Rule for VMS, DVR/NVR and ERM?

Answer:
擷取.PNG
擷取.PNG (13.19 KiB) Viewed 1636 times
yy.png
yy.png (13.89 KiB) Viewed 325 times


Reference:

[ UVS - 202008174002 ] VMS, NVR, ERM and SNVR Password Rule
by Faga
August 24th, 2020, 11:53 am
Forum: SNVR
Topic: [ SNVR ] SNVR1611, SNVR0812 and SNVR0412 Password Rule Special Symbols - 20200820
Replies: 0
Views: 1470

[ SNVR ] SNVR1611, SNVR0812 and SNVR0412 Password Rule Special Symbols - 20200820

Question:
What is the Password Rule for SNVR1611, SNVR0812 and SNVR0412?

Answer:
擷取.PNG
擷取.PNG (8.71 KiB) Viewed 1470 times
Reference:
[ UVS - 202008174002 ] VMS, NVR, ERM and SNVR Password Rule
by Faga
May 22nd, 2020, 10:15 am
Forum: IP cameras
Topic: [ IP Camera ] A/T series and EBD camera Port Mapping, UPnP, Port Forwarding - 20200511
Replies: 0
Views: 2055

[ IP Camera ] A/T series and EBD camera Port Mapping, UPnP, Port Forwarding - 20200511

Issue: A/T series and EBD camera cannot use Port Mapping to do a WAN connection. Solution: If you use A/T series and EBD camera with Port Mapping, it is allowed to turn on UPnP on your router. Here is a sample via link. https://tunecomp.net/upnp/ Reference: [ UVS - 202005064002 ] TVD8701 F/W v1.02 ...
by Faga
May 7th, 2020, 4:06 pm
Forum: Control Center
Topic: [ Control Center ] Control Center v3.7 Remote Viewlog show only 1 channel from Matrix with Recording Server - 20200505
Replies: 0
Views: 2058

[ Control Center ] Control Center v3.7 Remote Viewlog show only 1 channel from Matrix with Recording Server - 20200505

Issue: In Control Center v3.7, open Remote Viewlog from Matrix, the camera list show only one camera from Recording Server, even the matrix has more than 1 camera from Recording Server. 001.png Patch / Procedure ( GV-Control Center_V3.7.0.1.zip ): 1. Disable remote service on GV-Control Center. 2. ...
by Faga
April 13th, 2020, 6:05 pm
Forum: Mobile Apps
Topic: [ Mobile ] GV-Eye v2.7.3 Connect Lost blinking on Live View from VMS v17.3- 20200413
Replies: 0
Views: 2595

[ Mobile ] GV-Eye v2.7.3 Connect Lost blinking on Live View from VMS v17.3- 20200413

Issue: GV-Eye v2.7.3's channels are switching around between Connect Lost icon and live view but VMS v17.3's live view on those channels are OK. 001.PNG Patch / Procedure ( GV-VMS_V17.3.0.16.zip ): 1. Disable remote service on GV-VMS. 2. Close GV-VMS and other GeoVision software. 3. Download the pa...