[ AS Hardware ] LPR 1200 support SD card version to ask
Posted: December 13th, 2016, 3:02 pm
Q.1 How to recognize SD / SDHC version 2.0
A : Version 2.0 refers to the SD card write speed version differentiation
Will be set to Version 2.0 only the situation for fear of writing too low, will cause too late to write data, resulting in the loss of the situation,
But in the hardware, because the original 3.01 after the SD card is not popular and listed, so the plan is only 2.0 version can be used
The picture provided by the client can be seen out, the customer should be purchased version 3.01 version (interface UHS-I)
And we also have a special note to the official website, UHS-I version of the card is unable to support the use of
A : Version 2.0 refers to the SD card write speed version differentiation
- 圖片 2.jpg (72.55 KiB) Viewed 1985 times
But in the hardware, because the original 3.01 after the SD card is not popular and listed, so the plan is only 2.0 version can be used
The picture provided by the client can be seen out, the customer should be purchased version 3.01 version (interface UHS-I)
- 圖片 4.jpg (576.64 KiB) Viewed 1985 times
- 圖片 3.jpg (65.58 KiB) Viewed 1985 times