Page 1 of 1

[ AS Hardware ] CS1320, Face Detection Setup - 20161208

Posted: December 8th, 2016, 11:43 am
by AndyChen
Question:
How to setup CS1320 face detection?

Answer:
In CS1320's IE interface, under Face Detection Setting.....
Select " enable " on Enable card and Face mode option.
22.png
22.png (372.91 KiB) Viewed 2173 times
In addition, you may check " Show face detection area "
Then save the setting. Note that there is no need to configure anything on the ASManager side.
11.png
11.png (58.11 KiB) Viewed 2173 times
Reference:
RE: [ UVS - 201612026003 ] How to set up Face detect and card mode via GV-CS1320