[ ASManager ] PCR310, GV-AS2120, SD Card, FAT32 - 20161206
Posted: November 15th, 2016, 10:53 am
Questions 1
May I installed the PCR310 Reader on the remote PC (non-ASManager PC), whether it can use the "Reader" function of the ASWeb card list, send the card number to the ASManager DB in the remote card
Ans : Yes !
Questions 2
Customer response GV-AS2120 the SD card, insert will cause ASManager can not connect AS2120, but if the SD card exit, ASManager can be connected to the AS2120, may I ask what is the problem?
Ans : The reasoning may be that the SD card data is read abnormally because the controller will read the relevant data in the SD card when it is turned on, and it will start up normally after the completion of the operation. It is presumed that the controller is not started, resulting in no follow- If the client does not insert the SD card, the project will skip, you can boot normallyIt is recommended that the client can first remove the SD card, test whether the card can be read in the PC, if not, that the card is faulty, please replace the new card, if possible, on behalf of the data may be abnormal or SD card part Magnetic field is damaged You can try to copy the SD card file (if you can copy it), and then Format SD card, if the SD card in the action back to the Controller can be properly opened AS2120, but the follow-up or often can not connect Customers will be recommended to replace the SD card out
Questions 3
Will the GV-AS2120 SD card file format is FAT32 or Linux format?
Ans : GVAS SD card, the card format is FAT32, the client copy the data to the PC, if not properly open the file, this is normal, because the file is encoded using a more special way, basically if the use of Note Pad, etc. Program forced to open, you may see a pile of garbage
May I installed the PCR310 Reader on the remote PC (non-ASManager PC), whether it can use the "Reader" function of the ASWeb card list, send the card number to the ASManager DB in the remote card
Ans : Yes !
Questions 2
Customer response GV-AS2120 the SD card, insert will cause ASManager can not connect AS2120, but if the SD card exit, ASManager can be connected to the AS2120, may I ask what is the problem?
Ans : The reasoning may be that the SD card data is read abnormally because the controller will read the relevant data in the SD card when it is turned on, and it will start up normally after the completion of the operation. It is presumed that the controller is not started, resulting in no follow- If the client does not insert the SD card, the project will skip, you can boot normallyIt is recommended that the client can first remove the SD card, test whether the card can be read in the PC, if not, that the card is faulty, please replace the new card, if possible, on behalf of the data may be abnormal or SD card part Magnetic field is damaged You can try to copy the SD card file (if you can copy it), and then Format SD card, if the SD card in the action back to the Controller can be properly opened AS2120, but the follow-up or often can not connect Customers will be recommended to replace the SD card out
Questions 3
Will the GV-AS2120 SD card file format is FAT32 or Linux format?
Ans : GVAS SD card, the card format is FAT32, the client copy the data to the PC, if not properly open the file, this is normal, because the file is encoded using a more special way, basically if the use of Note Pad, etc. Program forced to open, you may see a pile of garbage