[ DVR/NVR ] v8.7 Multicam v8.7 with multi IP cameras connected but the all channels display the same camera - 20161104
Posted: November 14th, 2016, 2:13 pm
Issue:
Multicam v8.7 with multi cameras connected Live view only displays one camera. It requires to restart to the system to get all cameras back to live view.
Root Cause:
According to our RD, it appears that the driver used for the graphic card and DirectDraw these two sides conflict with each other.
Solution:
Disable DirectDraw in Multicam v8.7 as indicated as below.
Reference:
RE: [ FVS - 201610186002 ] Multicam v8.7 with multi IP cameras connected but the all channels display the same camera
Multicam v8.7 with multi cameras connected Live view only displays one camera. It requires to restart to the system to get all cameras back to live view.
Root Cause:
According to our RD, it appears that the driver used for the graphic card and DirectDraw these two sides conflict with each other.
Solution:
Disable DirectDraw in Multicam v8.7 as indicated as below.
- www.png (113.54 KiB) Viewed 1844 times
RE: [ FVS - 201610186002 ] Multicam v8.7 with multi IP cameras connected but the all channels display the same camera