[ DVR/NVR ] Multicam v8.7 Only Capture Card Webcam CPU increase 50% ~ 100% - 20161102
Posted: November 2nd, 2016, 3:08 pm
Issue:
Multciam v8.71 ( Capture card only ) whenWebCam Server is enabled, the CPU load jump from the mid 50% to 100%
Patch / Procedure:
http://ftp.geovision.tw/FTP/DerekHo/V8.7.1.0.c.zip
1. Exit DVR and make sure all of the GV-Related programs are completed closed
2. Unzip the patch files
3. Copy and paste the unzipped files into the location below C:\DVR
- GeoRSWLite.exe
- VersionInfo_GV-NVR-V8.7.1.0.c_161101.txt
4. Run GV-DVR
Reference:
RE: [ UVS - 201610206007 ] Multciam v8.71 when web server is enabled, the CPU load jump from the mid 50% to 100%
Multciam v8.71 ( Capture card only ) whenWebCam Server is enabled, the CPU load jump from the mid 50% to 100%
Patch / Procedure:
http://ftp.geovision.tw/FTP/DerekHo/V8.7.1.0.c.zip
1. Exit DVR and make sure all of the GV-Related programs are completed closed
2. Unzip the patch files
3. Copy and paste the unzipped files into the location below C:\DVR
- GeoRSWLite.exe
- VersionInfo_GV-NVR-V8.7.1.0.c_161101.txt
4. Run GV-DVR
Reference:
RE: [ UVS - 201610206007 ] Multciam v8.71 when web server is enabled, the CPU load jump from the mid 50% to 100%