[ VMS ] v15.11.1 with 50+ 3rd party ( ADCi ) cameras connected, live view show dropping, not reconnecting - 20161101
Posted: November 2nd, 2016, 11:14 am
Issue:
VMS v15.11.1 with 50+ 3rd party American Dynamics ( ADCi ADCI400-D011, ADCI400-B021 ) cameras connected, live view show dropping and not reconnecting.
Patch / Procedure ( GV-VMS_V15.11.1.0.a.zip ) :
http://ftp.geovision.tw/FTP/DerekHo/GV- ... .1.0.a.zip
1. Exit VMS and make sure all of the GV-Related programs are completed close
2. Exit GV-VMS and make sure all of the GV-Related programs are completed closed
3. Unzip the patch files
4. Copy and paste the unzipped files into the location below C:\
- ONVIF.dll
- VersionInfo_GV-VMSV1511.1.0_161021.txt
5. Run VMS again to see how everything goes.
Reference:
RE: [ UVS - 201610206003 ] VMS v15.11.1 with 50+ 3rd party ( ADCi ) cameras connected, live view show dropping and not reconnecting
VMS v15.11.1 with 50+ 3rd party American Dynamics ( ADCi ADCI400-D011, ADCI400-B021 ) cameras connected, live view show dropping and not reconnecting.
Patch / Procedure ( GV-VMS_V15.11.1.0.a.zip ) :
http://ftp.geovision.tw/FTP/DerekHo/GV- ... .1.0.a.zip
1. Exit VMS and make sure all of the GV-Related programs are completed close
2. Exit GV-VMS and make sure all of the GV-Related programs are completed closed
3. Unzip the patch files
4. Copy and paste the unzipped files into the location below C:\
- ONVIF.dll
- VersionInfo_GV-VMSV1511.1.0_161021.txt
5. Run VMS again to see how everything goes.
Reference:
RE: [ UVS - 201610206003 ] VMS v15.11.1 with 50+ 3rd party ( ADCi ) cameras connected, live view show dropping and not reconnecting