GV FAE Knowledge

Issue:
Multicam v8.71 startup auto login not working if "search pos data / pos live view" is not checked for power user

Root Cause:
It happens on both Power user and User. The reason why it won’t happen on supervisor account is because it’s already checked as default value.

Patch / Procedure ( V8.7.1.0.a):

http://ftp.geovision.tw/FTP/DerekHo/GV- ... .1.0.a.zip

1. Exit GV-NVR and make sure all of the GV-Related programs are completed closed
2. Unzip the patch files
3. Copy and paste the unzipped files into the location below C:\NVR

- GeoSysCenter.exe
- VersionInfo_GV-NVR-V8710_161019.txt

4. Run GV-NVR
* This patch is based on NVR v8.71 and it is only for NVR.

If you are using DVR v8.71, please download the patch below.

Patch / Procedure (V8.7.1.0.g):
http://ftp.geovision.tw/FTP/DerekHo/V8.7.1.0.g.zip
1. Exit Multicam and make sure all of the GV-Related programs are completely closed
2. Unzip the patch files
3. Copy and paste the unzipped files into the location below C:\(Installation folder)
- GeoSysCenter.exe
- VersionInfo_V8.7.1.0.g_161110.txt
4. Run Multicam

Reference:
RE: [ UVS - 201610196003 ] Multicam v8.71 startup auto login not working if "search pos data / pos live view" is not checked for power user