[ Tower ] Tower System not booting up after power resumes from blackout - 20160830
Posted: August 30th, 2016, 3:45 pm
Question:
Tower System not booting up after power resumes from blackout - 20160830
Answer:
In BIOS, under the “SAVE & EXIT” tab, as shown in screenshot below, you need to select the option “Reset System With ME disable Mode”.
Tower System not booting up after power resumes from blackout - 20160830
Answer:
In BIOS, under the “SAVE & EXIT” tab, as shown in screenshot below, you need to select the option “Reset System With ME disable Mode”.
- 2016-08-26_16h56_00.jpg (73.38 KiB) Viewed 5051 times