[ IP Camera ] How to connect external AC24V with SD2301/2411/PPTZ7300? - 20160329

[support]

Applied to
SD3201/2411/PPTZ7300

Question
Can I use external AC24V with SD2301/2411/PPTZ7300?

Answer
In order for SD2301/2411/PPTZ7300 to support external AC24V power source, user might use the adapter cable came with the camera or remove the adapter socket manually following the steps provided below.

1. Cut off the adapter socket to reveal the power contact wires.

2016-03-29_12h30_27.jpg (29.86 KiB) Viewed 2185 times

2. Connect the DC/AC24V Power cable and use insulation tape to cover the wires

2016-03-29_12h39_18.jpg (24.77 KiB) Viewed 2185 times

_______________________________________________________________________
Note:
SD2301/2411/PPTZ/ are compatible with AC power source (+/- marking not required)
_______________________________________________________________________
3. Apply additional insulation tape to cover all the power wires

2016-03-29_12h39_25.jpg (12.45 KiB) Viewed 2185 times

[IPCam]ConnectingExternalAC24VwithSD2301_2411_PPTZ7300.pdf

(2.26 MiB) Downloaded 323 times