BX1500 & BX5300 F/W v3.0 Stream 1 and 2 FOV different, affects Advance Motion Detection
Root Cause:
This is hardware spec of sensor and there is no way to have Stream 1 and Stream 2 have the same FOV
Solution:
Increase the Stream 2 resolution to VGA to reduce difference in FOV between Stream 1 and 2. If heavy bandwidth is a concern, the following changes can be done to reduce bandwidth usage:
1. Limit maximum bitrate size in VBR mode
2. Change the stream 2 quality to fair or standard
3. Change to CBR mode
4. Decrease the FPS
Why BX1500 & BX5300 FW v3.0 Stream 1 and 2 has different FOV which affects Advance Motion Detection.pdf- (236.11 KiB) Downloaded 961 times
[ UVS - 201507158003 ] BX1500 & BX5300 F/W v3.0 Stream 1 and 2 FOV different, Advance Motion Detection