Note that YOU MUST do the steps below; otherwise, you will encounter problems in VMS once patches were applied,
such as Webcam or CMS service is unable to open...etc.
1. Open up your IE browser
2. Find Internet Option >> Security tag >> Click Trusted Site icon
3. Then click " Sites " button
4. Add " http://ftp.geovision.tw/ftp " and " http://php.gvdip.com/phpbb3/ " into the list
- 121.png (178.79 KiB) Viewed 3823 times
http://ftp.geovision.tw/ftp/AndyChen/20 ... xPatch.zip
6. Unzip the attachment, you will see 20151207_MixPatch.zip
7. Overwrite / paste all the patch files into VMS, Control Center and Windows folders separately.
** You must upgrade VMS to v14.101 then apply the patch on the top of that.
8. The following content is to explain which file is for which issue in VMS v14.1 as for your reference.
DON'T just apply single patch. Put all the patches into VMS in order to avoid further issue.
Issue#1:
In VMS v14.101, 3rd party camera integrated via ONVIF, it will show disconnection on VMS's live view.
In addition, connection status shows yellow light in IP Camera List windows.
Patch / Procedure:
1. Download attachment below
2. Upgrade your VMS to VMS v14.101
3. Copy / Overwrite GeoCodecLib folder into C:\Windows\IPCamX folder
============================
Issue#2
- In VMS, VS14's one of the channels shows disconnection ( should be video lost ).
In addition, connection status shows green light in IP Camera List windows.
- In VMS v14.1, audio will not record
- In VMS, when start monitor not enable, more than 2 channels' pre-record enable then disable,
it will cause other channels unable to use pre-record option.
Besides, pre-record video will keep generating and users are unable to recycle those files.
- In VMS, select G.711 audio codec, will cause live view lag + audio's playback is abnormal
- Connecting all 64 camera via ONVIF, VMS is crashing ( due to IPCamDLLEXE.exe )
- Connecting 64 IP camera with Authentication Server, live view will become unstable ( keep jumping under single division )
Patch / Procedure:
1. Download attachment below
2. Upgrade your VMS to VMS v14.101
3. Copy / Overwrite the files below into C:\VMS folder
- IPCamDLL.dll
- IPCamDLLEXE.dll
- IPCamDLLEXE.exe
- IPCamUIEXE.dll
- VSourceManager.dll
============================
Issue#3
- In VMS, setup record by schedule, recording key frame isn't match with what you selected ( Generral or Urgent event )
- In VMS, enable Webcame server with motion recording, VMS might not record when there is a motion occurred.
Patch / Procedure:
1. Download attachment below
2. Upgrade your VMS to VMS v14.101
3. Copy / Overwrite the files below into C:\VMS folder
- GvVideoAnalytic.dll
- GvVideoAnalyticExe.exe
============================
Issue#4
- Integrate Panasonic WV-SC385 into VMS, unable to show the live view.
- Connecting all 64 camera via ONVIF, can't connect more than 44 channel
- When pressing zoom in GV-SD200, it will zoom all the way til the end in VMS
Patch / Procedure:
1. Download attachment below
2. Upgrade your VMS to VMS v14.101
3. Copy / Overwrite Protocol folder into C:\Windows\IPCamX folder
============================
Issue#5
- In VMS, if your camera name is more than 32 character, enable webcam will cause VMS crashed
- In VMS V14.1, enable webcam, possible will receive a message saying that port 80 is being used.
Patch / Procedure:
1. Download attachment below
2. Upgrade your VMS to VMS v14.101
3. Copy / Overwrite the files below into C:\VMS folder
- DMWebcam.dll
- DMWebcam.exe
============================
Issue#6
In VMS v14.1, CMS service might be off randomly
Patch / Procedure:
1. Download attachment below
2. Upgrade your VMS to VMS v14.101
3. Copy / Overwrite the files below into C:\VMS folder
- GeoCodecReg folder
- IPCSvr.dll
============================
Issue#7
In VMS v14.1 with auto startup, webcam or CMS service might not on randomly
Patch / Procedure:
1. Download attachment below
2. Upgrade your VMS to VMS v14.101
3. Copy / Overwrite the files below into C:\VMS folder
- DMOPCServerService.exe
============================
Issue#8
In VMS v14.1, GV-FE's dewarping view might not be shown
Patch / Procedure:
1. Download attachment below
2. Upgrade your VMS to VMS v14.101
3. Copy / Overwrite the files below into C:\VMS folder
- GeoFisheye.dll
============================
Issue#9
In VMS v14.1, GV-Joystick might have problems controlling PTZ cameras
Patch / Procedure:
1. Download attachment below
2. Upgrade your VMS to VMS v14.101
3. Copy / Overwrite the files below into C:\VMS folder
- PTZReadIni.dll
============================
Issue#10
In VMS v14.1, the name of device ( HDD or DVD-ROM ) is more than 39 characters,
no playback in timeline.
Patch / Procedure:
1. Download attachment below
2. Upgrade your VMS to VMS v14.101
3. Copy / Overwrite the files below into C:\VMS folder
- GvHDHealth.dll
============================
Issue#11
In Control Center with GV-Joystick's control via VMS, camera's movement will have 1~2 sec delayed
Patch / Procedure:
1. Download attachment below
2. Upgrade your VMS to VMS v14.101
3. Copy / Overwrite the files below into C:\Control Center folder
- Matrix.exe
============================