[ AS Hardware ] AS1010 v1.1 display card is lock message when it running as stand alone mode - 20150909
Posted: September 9th, 2015, 4:22 pm
Issue:
AS1010 v1.1 display "card is lock" message when it running as stand alone mode
Cause:
This issue only occurs in stand alone mode, when AS1010 disconnect ASManager, the RTC (time chip) will calculate wrong time, when user swipe the card in this wrong period of time, you'll get "card is lock" message, you can't open the door
Solution:
Work around solution:
1. Keep AS1010 connection with ASManager, ASManager will sync correct date/time
2. Disable card lock function in ASManger and sync controller setting again
or
Apply firmware AFTER version 1.1
Reference:
[ BVS - 201507212001 ] How to solve AS1010 display "key test" info and AS1010 with "Card lock " info
AS1010 v1.1 display "card is lock" message when it running as stand alone mode
Cause:
This issue only occurs in stand alone mode, when AS1010 disconnect ASManager, the RTC (time chip) will calculate wrong time, when user swipe the card in this wrong period of time, you'll get "card is lock" message, you can't open the door
Solution:
Work around solution:
1. Keep AS1010 connection with ASManager, ASManager will sync correct date/time
2. Disable card lock function in ASManger and sync controller setting again
- disable_lock.png (149.95 KiB) Viewed 1960 times
Apply firmware AFTER version 1.1
Reference:
[ BVS - 201507212001 ] How to solve AS1010 display "key test" info and AS1010 with "Card lock " info