[IPCam] How to install Target bullet (EBL) Silica Gel Tape - 20150827
Posted: August 27th, 2015, 11:54 am
Question:
How to install or place the silica gel tape into EBL camera?
Answer:
Step01. Place the tape inside cover as shown in the photo.
Step02. tighten the EBL cover
Step03. Make sure the cover is properly tighten and tape is not blocking the lens or the IR leds.
How to install or place the silica gel tape into EBL camera?
Answer:
Step01. Place the tape inside cover as shown in the photo.
- 2015-08-27_11h51_42.jpg (13.15 KiB) Viewed 2096 times
- 2015-08-27_11h51_55.jpg (15.39 KiB) Viewed 2096 times
- 2015-08-27_11h52_07.jpg (11.57 KiB) Viewed 2096 times