[ ASManager ] How to integrate Wiegand 33 bit reader (DSX-HID 33 bit ) Third party 3rd card ? - 20150819

[Pearl]

Question:
How to integrate 33 Bit Wiegand DSX-HID reader with AS210?

Standard procedures:
Please check Facility bits, cardno bits and parity bits information for 3rd party Wiegand reader support

customize_wiegand.jpg (73.62 KiB) Viewed 2848 times

If you can't get these information, please swipe 3 different cards and provide the information below:

Please provide these information so we can generate facility code.
1. connect the HID reader to the AS-Controller. With the ASManager connected to it, please swipe 3 different cards, once each, on the reader. You should get 3 scans.
2. The 3 cards that you swiped (please email me the list of numbers that is printed on the card and the order you scanned them in)
3. The ASRes.zip file.(you can find it in c:\Access Control\ASRes)
4. For the HID reader, please confirm if they are Weigand 33-bit? Do you know if they are 125kHz or 13.56MHz frequency?

3cards.png (96.9 KiB) Viewed 2848 times

After you get the "CustomizedCard.ini" file from GeoVision, please follow procedures to apply the customized 33 bit Wiegand data file:

1. Exit GV-ASManager software
2. Find file location: c:\Access Control\ASManager\
3. Rename CustomizedCard.ini as oldcustomizedcard.ini
4. copy file after unzip the attachment to same location c:\Access Control\ASManager\
5. Restart PC
6. Restart ASManager

Reference:
[ UVS - 201507222001 ] How to integrate 33 Bit Wiegand DSX-HID reader with AS210