GV FAE Knowledge

Posted: **August 12th, 2015, 6:07 pm**

: toomanyuser_non.jpg (642.64 KiB) Viewed 1747 times

When ONVIF camera connection over 44 with dual streaming mode in VMS v14.1, you'll get following information:

1. too many user in red exclamation mark status in ipcam install box
2. You're not allowed to add more ONVIF camera

ONVIF command in VMS 14.1 didn’t setup properly, You can apply patch below or apply v14.101.

Patch for over 44 ONVIF camera patch download:
http://ftp.geovision.tw/FTP/Support/UVS ... Fissue.zip

How to apply the patch:
1. Exit GV VMS
2. Download and unzip the patch
3. Copy the files into C:\Windows\IPCAMX\Protocol folder
4. Restart GV VMS

UVS-201505292001_ONVIFissue.zip: (1.96 MiB) Downloaded 256 times

This patch is for VMS v14.1, v14.101 solve this issue.

Reference:
[ UVS - 201505292001 ] VMS v14.1 and ONVIF Cameras Connectivity - too many user

GV FAE Knowledge

[VMS] Why there are too many user in red exclamation mark status in ipcam install box - 20150812

[VMS] Why there are too many user in red exclamation mark status in ipcam install box - 20150812