[ Decoder Box ] Decoder box showing "Resolution Error" or "Codec Error" message
Posted: December 27th, 2014, 10:16 am
Applied to
GV-IP Decoder Box / GV-Pad firmware V1.05 or later
To display live view on GV-IP Decoder Box / GV-Pad, IP camera's streams must be set to the following:
H.264 codec and
a resolution of 1280 x 720 or lower (under quad-view); 5 MP or lower (under single view)
Upon connection, the GV-IP Decoder Box / GV-Pad will first connect with stream 1 and only
attempt to connect to stream 2 if any of the codec or resolution settings are invalid. When you
see the “Resolution Error“ or “Codec Error message“, check the resolution and codec settings
of the connected IP device.
GV-IP Decoder Box / GV-Pad firmware V1.05 or later
To display live view on GV-IP Decoder Box / GV-Pad, IP camera's streams must be set to the following:
H.264 codec and
a resolution of 1280 x 720 or lower (under quad-view); 5 MP or lower (under single view)
Upon connection, the GV-IP Decoder Box / GV-Pad will first connect with stream 1 and only
attempt to connect to stream 2 if any of the codec or resolution settings are invalid. When you
see the “Resolution Error“ or “Codec Error message“, check the resolution and codec settings
of the connected IP device.