GV FAE Knowledge

[ GV-VMS V 20.0.2.10 Patch information ]

New:
1. Support New IP device
- GV-CBL2800 / CEB2800 / CBL4811 / CEB4811 (HD DVR license required, support AI Event)
- GV-TMS20811
- GV-GBLF4813 / GV-GBLP8900 / GEBF4813 / GV-GEBP8900 / GDRN4800 / GVD4810 / GVD12810
2. Support for the following HD DVR model:
- GV-TXVL1610 (HD DVR license required)
3. Support for receiving Loitering events from GV G Series IP Cameras with the built in Loitering function
4. Support for receiving Face Detection events from GV-BX2700-FD (IP camera)
5. Video metadata support expanded to include 17 additional vehicle brands for AI Query
BRABUS, BYD, Citroen, Dacia, Isuzu, LANCIA, LYNK&CO, MG, Opel, Pagani, Peugeot, Renault, SKODA, SUZUKI, Seat, Smart, SsangYong.
6. Support for GV-Joystick V3
7. support for GV-VMS V20 POS transaction features in GV-Cloud V1.6.0 or later (Patch V20.0.2.5)


Fixed:
1. Abnormal snapshots with partial green-tinted overlays recorded in the Event List for Crowd Detection events. (V20.0.1.1)
2. Face group data error when group data is modified multiple times for a face profile (Face Manager > Face Enrollment) (V20.0.1.2)
3. Issue with motion event recordings containing only key frames when applying both Round-the-Clock (General Event) and Advanced Motion Detection (Urgent Event) settings (V20.0.1.2)
4. Chances of unexpected main stream or sub stream disconnection. (V20.0.1.3)
5. Blurred image issue where sub stream cannot switch to main stream when Privacy Mask with ROI Apply Mosaic is enabled. (V20.0.1.3)
6. Chances of “Connection Lost” or “Video Not Updated” messages occurred after switching from single screen to multi-screens (issue disappears after a few seconds). (V20.0.1.3)
7. Chances of motion detection mechanism error. (V20.0.1.3)
8. Failure to output audio when playing audio files under 2 seconds on a connected IP speaker (V20.2.1)
9. Issue of GV-Desktop not functioning properly after an abnormal shutdown and restart (V20.2.1)
10. Chances of system errors when adding GV-IP Decoder Box. (V20.0.2.3)
11. Issue with playback timeline errors occurring when the recording database folder is renamed in French. (V20.0.2.3)
12. Chance of system errors when using certain third-party cameras. (V20.0.2.3)
13. Issue with cameras not appearing the IP Device Setup list after rearranging the list order and camera ID. (V20.0.2.3)
14. Issue with assigning multiple channels from a multi-sensor camera to GV-IP Decoder Box’s layout. (V20.0.2.3)
15. Issue where channel displays are duplicated when assigning multiple channels from the GV-TMS20811 camera. (V20.0.2.3)
16. Issue where input trigger events were not received from Milesight cameras through ONVIF connection. (V20.0.2.5)
17. Issue where errors occurred when connecting multiple fisheye cameras. (V20.0.2.5)
18. Layout issue occurred with advanced log results when exported to PDF. (V20.0.2.5)
19. Issue with live view timeout when connecting to GV-Control Center or GV-Edge Recording Manager for an extended period. (V20.0.2.5)
20. Issue with the File Transfer Service in Remote Desktop when accessed via GV Control Center or GV Edge Recording Manager. (V20.0.2.6)
21. Issue with UI errors after adding 3rd party cameras (Dahua DH-IPC-HUM8441E-E1-L1) through ONVIF. (V20.0.2.7)
22. Issue of privacy mask regions on other channels becoming smaller after maximizing the UI and saving settings during configuration.(V20.0.2.8)
23. Issue with motion events triggered within privacy masks.
24. Issue with the hardware motion detection setting failed to enable for GV-C Series IP cameras, after monitoring began.



Modified:
1. POS transaction data text on video channels optimized to automatically adjust to the window size
2. Trigger Interval Time option added to Abnormal Temperature Detection
3. Illumination Mode option added to Video Settings in IP Device Setup, supporting switching between Infrared Light and White Light



Improved:
1. Pop-up notice when enabling the camera’s built-in motion detection, reminding users to check motion detection settings in the camera. (V20.0.2.3)
2. Cybersecurity enhanced in the WebCam Server

*Note: This patch includes the following: V20.0.1.1/20.0.1.2/20.0.1.3/20.0.2.1/20.0.2.2/20.0.2.3/20.0.2.5/20.0.2.6/20.0.2.7/20.0.2.8/20.0.2.9



Patch Link:
https://dlcdn.geovision.com.tw/Software ... 0.2.10.zip

GV-VMS V 20.0.2.2 Update

[ GV-VMS V 20.0.2.3 Patch information ]
Fixed:
1. Chances of system errors when adding GV-IP Decoder Box.
2. Issue with playback timeline errors occurring when the recording database folder is renamed in French.
3. Chance of system errors when using certain third-party cameras.
4. Issue with cameras not appearing the IP Device Setup list after rearranging the list order and camera ID.
5. Issue with assigning multiple channels from a multi-sensor camera to GV-IP Decoder Box’s layout.
6. Issue where channel displays are duplicated when assigning multiple channels from the GV-TMS20811 camera.
Improved:
Pop-up notice when enabling the camera’s built-in motion detection, reminding users to check motion detection settings in the camera.

New:
Support for GV-GBLP8900 /GV-GEBP8900
Support for GV-VMS V20 POS transaction features in GV-Cloud V1.6.0 or later (Patch V20.0.2.5)

Fixed:
1. Issue where input trigger events were not received from Milesight cameras through ONVIF connection
2. Issue where errors occurred when connecting multiple fisheye cameras
3. Layout issue occurred with advanced log results when exported to PDF
4. Issue with live view timeout when connecting to GV-Control Center or GV-Edge Recording Manager for an extended period

Fixed:
Issue with the File Transfer Service in Remote Desktop when accessed via GV Control Center or GV Edge Recording Manager

Fixed:
Issue with UI errors after adding 3rd party cameras (Dahua DH-IPC-HUM8441E-E1-L1) through ONVIF.

[ GV-VMS V 20.0.2.8 Patch information ]

Fixed:
1. issue of privacy mask regions on other channels becoming smaller after maximizing the UI and saving settings during configuration.

Patch file Version: GV-VMS V20.0.2.9
Fixed:
1. Issue with motion events triggered within privacy masks.
2. Issue with the hardware motion detection setting failed to enable for GV-C Series IP cameras, after monitoring began.

GV-VMS V20.0.2.10
Improved:
Cybersecurity enhanced in the WebCam Server