[ IP Camera ] How to check a GeoVision Device Barcode/Serial number? - 20250903

support · Unread post by **support** » September 3rd, 2025, 1:56 pm

Users can locate the GeoVision Barcode or Serial number through the following methods:

1. Barcode/Serial Number Sticker:
On the shipping box, or on the device itself where users can find and identify a sticker:

Sample 1: IP Camera sticker.

On the cable	On the back
2025-09-04_07h19_36.png (703.13 KiB) Viewed 10189 times	2025-09-04_07h20_45.png (478.03 KiB) Viewed 10189 times

Sticker

: 2025-09-03_10h55_47.png (222.69 KiB) Viewed 10213 times

Sample 2: Standalone unit back panel sticker

At the bottom of the device

: 2025-09-04_07h20_15.png (374.12 KiB) Viewed 10184 times

Sticker

: 2025-09-03_10h55_27.png (265.55 KiB) Viewed 10213 times

Sample 3: Access Control product sticker

On the back	On the back
2025-09-04_07h38_05.png (520.94 KiB) Viewed 10177 times	2025-09-04_07h39_16.png (485.47 KiB) Viewed 10177 times

Sticker

: 2025-09-03_10h57_46.png (141.63 KiB) Viewed 10213 times

Sample 4: GV-Systems sticker

On the back	On the back
2025-09-04_07h43_33.png (284.76 KiB) Viewed 10175 times	2025-09-04_07h43_05.png (123.6 KiB) Viewed 10175 times

Sample 5: USB dongle engraving number

: 2025-09-03_10h58_18.png (80.88 KiB) Viewed 10213 times

2. GV-IP Device Utility.
GeoVision IP Device Utility can display the serial number for supported devices.

: 2025-09-03_11h06_18.png (75.52 KiB) Viewed 10213 times

For devices that are not displayed in the utility, please revert to the physical sticker for the barcode/serial number.