[Recording Server] How to re-install and back up software setting and recording database - 20250730

[support]

Q. How to back up and Re-install GV-Recording Server software?

A. User may perform the questioned task with the steps provided:

Before attempting, please make sure to stop the Recording Server service using the system tray icon.

[hr]

1. Using FBR

1. Stop the Recording Server by right-clicking the Recording Server icon in the system tray and selecting Backup Settings as shown below.

   

   2025-07-30_14h14_25.png (36.98 KiB) Viewed 4277 times

   

   2025-07-29_11h24_21.png (57.13 KiB) Viewed 4277 times

2. Check the configurations you want to back up.

   

   2025-07-29_11h59_26.png (27.09 KiB) Viewed 4277 times

3. Save to a .backup file.

   

   2025-07-29_12h43_52.png (43.61 KiB) Viewed 4277 times

To import the settings:

1. Click the Recording Server icon again after stopping the service, then select Restore Settings.

   

   2025-07-29_11h51_07.png (42.99 KiB) Viewed 4277 times

2. Choose the .backup file to import.

   

   2025-07-29_12h43_52.png (43.61 KiB) Viewed 4277 times

3. Select the settings to import and click the OK button.

   

   2025-07-29_12h44_38.png (17.35 KiB) Viewed 4277 times

4. A progress bar will appear, and the message Done will be shown once the process is complete.

   

   2025-07-29_12h44_59.png (21.56 KiB) Viewed 4277 times

5. When finished, please restart the Recording Server service.

   

   2025-07-30_14h27_04.png (40.89 KiB) Viewed 4277 times

*Note: We do not recommend removing the Recording Server program source folder.

[hr]

2. Clean Re-install (Optional)

If the user wishes to remove the Recording Server folder for a clean re-install:

1. Perform a backup using FBR and manually copy the .db3 files for use during restore.
2. Use File Explorer to open the Recording Server software program folder.

   

   2025-07-30_14h33_58.png (72.19 KiB) Viewed 4277 times

3. Locate and back up all .db3 files under the Recording Server folder to a temporary location.

   

   2025-07-29_11h50_12.png (230.27 KiB) Viewed 4277 times

4. After installing the new Recording Server:
   • Import the FBR settings
   • Manually copy the .db3 files back into the Recording Server program folder

Note: If the .db3 files were configured to be stored outside the default Recording Server program path (

Code: Select all

C:\Program Files (x86)\Recording Server\

), you may skip the manual copy step and only perform the FBR restore.[/i]

2025-07-29_12h43_52.png (43.61 KiB) Viewed 4277 times