[ Mobile ] Fisheye can not dewarp in GV-EYE - 20150129
Posted: January 29th, 2015, 9:45 pm
Applied to
GV-EYE v2.1, MultiCam v8.59 with GV-EYE patched
Question
User can not dewarp Fisheye in GV-EYE
Answer
User can not dewarp Fisheye in GV-EYE because new Fisheye installed in MultiCam.
New fisheye model is GV-FE4303 / FE5303 / FE2302 / FE3402 / FE5302 / FER3403 / FER5303 / FER3402 / FER5302
Procedure
1. Download this patch Go to this website (http://www.geovision.com.tw/english/5_8.asp )
2. Close all GV-Application
3. Unzip and there are three items. Follow the instruction in pdf file
4. Launch MultiCam and delete all fisheye in “Camera List” and install it again to let system to renew configuration for Fisheye
5. Launch WebCam Server in MultiCam
6. Remove all Fisheye camera in GV-Eye and re-install them back
GV-EYE v2.1, MultiCam v8.59 with GV-EYE patched
Question
User can not dewarp Fisheye in GV-EYE
Answer
User can not dewarp Fisheye in GV-EYE because new Fisheye installed in MultiCam.
New fisheye model is GV-FE4303 / FE5303 / FE2302 / FE3402 / FE5302 / FER3403 / FER5303 / FER3402 / FER5302
Procedure
1. Download this patch Go to this website (http://www.geovision.com.tw/english/5_8.asp )
2. Close all GV-Application
3. Unzip and there are three items. Follow the instruction in pdf file
- 22.png (10.41 KiB) Viewed 2643 times
- 23.png (116.57 KiB) Viewed 2643 times
6. Remove all Fisheye camera in GV-Eye and re-install them back