[Mobile] How to Connect GV-EYE (Android) to GV-VMS the Easiest Way? - 20230808
Posted: August 8th, 2023, 11:24 am
Question:
How to Connect GV-EYE (Android) to GV-VMS the Easiest Way?
Answer:
1. First, we need to configure the VMS to enable Mobile service. Click Home > Toolbar > Network > Mobile Service
2. A box will appear with the name Mobile Server Lite. Go to the QR Code tab and Check Enable, then click Start.
3. Now go to the Play Store and download the GV-Eye app.
4. Open the app and grant all permissions.
5. Tap on the Setting Sign as shown below
6. Tap on the Add a binding Account.
7. You can bind by entering an email address to Get the Verification code or directly register by tapping on Google for auto binding.
8. After binding the account, go back and Tap on the three dots as shown in the picture.
9. Then Tap on the QR Code and allow the camera permission if asked. Then scan the QR Code from VMS Mobile Service.
10. Fill in the Username and Password of the VMS and Tap on Save. A pop up will appear, and Tap OK.
11. All cameras from VMS will appear automatically.
For more information, please check out the link below
https://s3.amazonaws.com/geovision_down ... -Guide.pdf
How to Connect GV-EYE (Android) to GV-VMS the Easiest Way?
Answer:
1. First, we need to configure the VMS to enable Mobile service. Click Home > Toolbar > Network > Mobile Service
- Screenshot_1.png (18.92 KiB) Viewed 6398 times
- Screenshot_2.png (22.72 KiB) Viewed 6398 times
4. Open the app and grant all permissions.
- Screenshot_3.png (19.89 KiB) Viewed 6398 times
- Screenshot_4.png (8.38 KiB) Viewed 6398 times
- Screenshot_5.png (14.91 KiB) Viewed 6398 times
- Screenshot_6.png (21.97 KiB) Viewed 6398 times
- Screenshot_7.png (6.42 KiB) Viewed 6398 times
- Screenshot_8.png (11.91 KiB) Viewed 6398 times
- Screenshot_9.png (32.89 KiB) Viewed 6398 times
- Screenshot_10.png (144.4 KiB) Viewed 6398 times
https://s3.amazonaws.com/geovision_down ... -Guide.pdf