[Technical Notice] Audio Setting Failure on GV-FER5702 V1.06

amber · Unread post by **amber** » May 26th, 2023, 1:37 pm

Article ID: GV3-23-05-25-A
Release Date: May 25, 2023

Applied to
GV-FER5702 (firmware V1.06)

Symptom
After GV-FER5702 is upgraded to V1.06, the system fails to apply Audio setting changes with a pop-up message displaying “Setting the parameter(s) failed.”

: 01.png (141.03 KiB) Viewed 9808 times

Solution
To successfully apply the Audio settings, restore to default settings on GV-FER5702 Web interface and try changing the Audio settings again.

On the Web interface of GV-FER5702, select Setup > System > Maintenance, and select Default in the Config Management section. The camera should restart after successfully restoring to default settings.

02.jpg (75.7 KiB) Viewed 9808 times
On the Audio setting page, set the desired parameters and click Save.

The changes should be successfully applied.