GV FAE Knowledge

Question:
How to silent install the GV-NVR?

Answer:
Step 1. Open notepad and paste the information below into the notepad file, name the file as Silent.ini and save it to C:\Windows.
Step 2. Run the GV-NVR installer to silent install the GV-NVR.

[SilentInstall]
Enable=Yes
DriverInstall=Yes
LaunchAPPandWaitInstall=Yes

[Main System]
Install=Yes
Card=GVNVR
Location=C:\GV-NVR
ProgramFolder=GV-NVR
VideoType=PAL
AutoStart=Yes
RemoteController=Yes
MainPanel=1024
Reboot=No

Description of Install Parameters:
[SilentInstall]
Enable=Yes
; Yes=enable, No=disable

DriverInstall=Yes
; Yes=enable, No=disable

LaunchAPPandWaitInstall=Yes
; Yes=enable, No=disable

[Main System]
Install=Yes
; Yes=install, No=Not to Install

Card=GVNVR
;GVNVR,GV2008,GV2004,GV1480,GV1000,GV900,GV800,G750,GV650,GV600,GV250
; Enter installation type (NVR or DVR)

Location=C:\GV-NVR
ProgramFolder=GV-NVR
; Enter the installation location and folder name

VideoType=PAL
; Enter video type for DVR, NTSC/PAL/SECAM

AutoStart=Yes
; Yes=Add to startup, No=Not to add to startup

RemoteController=Yes
; Yes=Install Remote Control, No=Not to Install Remote Control

MainPanel=1024
;NVR/DVR UI Resolution, 1920(1920*1200), 1600(1600*1200), 1680(1680*1050), 1280(1280*1024), 1024(1024*768) or 800(800*600)

Reboot=No
; Yes=Reboot when the installation is finished, No=Not to reboot when the installation is finished


Reference:
[ BVS – 202302038002-L ] VMS_Do VMS & NVR Support Silent Install?