[Dispatch Center V2 VSM] Server Service failed to start up due to port conflict - 20220923
Posted: September 23rd, 2022, 12:58 pm
Issue:
Dispatch/ Center V2/ VSM shows pop up message "failed to start up server"
Solution:
It is common to run into this message when network ports configured are already being used and hence network port conflict.
User is recommended to check network ports (TCP/UDP) available and manually configure software's port setting as shown located below to avoid network port conflict.
Dispatch Server:
Center V2:
VSM:
Dispatch/ Center V2/ VSM shows pop up message "failed to start up server"
Solution:
It is common to run into this message when network ports configured are already being used and hence network port conflict.
User is recommended to check network ports (TCP/UDP) available and manually configure software's port setting as shown located below to avoid network port conflict.
Dispatch Server:
- dispatch1.png (8.92 KiB) Viewed 4109 times
- dispatch2.png (85.82 KiB) Viewed 4109 times
- center1.png (11.13 KiB) Viewed 4109 times
- center2.png (57.67 KiB) Viewed 4109 times
- vsm1.png (8.19 KiB) Viewed 4109 times
- vsm2.png (39.98 KiB) Viewed 4109 times