[Technical Notice] Failing to Upgrade Firmware on UA-XVL810 V1.01 Web Interface and UVS Device Utility

amber · Unread post by **amber** » August 8th, 2022, 2:17 pm

Article ID: GV3-22-08-02-A
Release Date: Aug. 02, 2022

Applied to

UA-XVL810 firmware V1.01

Symptom
When the output resolution is not set to 1024 x 768 on UA-XVL810 V1.01, the firmware upgrade on the Web interface or UVS Device Utility fails.

Solution
To upgrade firmware on UA-XVL810 V1.01 Web interface or UVS Device Utility, make sure the output resolution is set to 1024 x 768 first.

On UA-XVL810, select Remote Setting > System > General > Output Configuration, and set the output resolution to 1024 x 768.

: 01.jpg (86.02 KiB) Viewed 3682 times