[ IP Camera ] Extender solution for cameras using POE++ - 20220218
Posted: February 18th, 2022, 12:08 pm
Question:
How to extend the distance between a camera using POE++ and the network switch.
Answer:
We currently do not offer POE Extenders that support POE++.
It is suggested to serially connect POEX0100 from the network switch to the POE++ injector then connect the POE++ injector to the camera to increase the overall connection distance.
Note: This method will only extend the maximum distance for the data.
Please refer to the diagram below using the QSD5731-IR and GV-PA902BT or GV-PA903BT (POE++) as an example.
Reference:
[ UVS - 202202094002 ] QSD5731-IR, suggested repeater solution for use with GV-PA902BT & GV-PA903BT
How to extend the distance between a camera using POE++ and the network switch.
Answer:
We currently do not offer POE Extenders that support POE++.
It is suggested to serially connect POEX0100 from the network switch to the POE++ injector then connect the POE++ injector to the camera to increase the overall connection distance.
Note: This method will only extend the maximum distance for the data.
Please refer to the diagram below using the QSD5731-IR and GV-PA902BT or GV-PA903BT (POE++) as an example.
- 111-02-22_17h51_49.jpg (19.3 KiB) Viewed 3297 times
[ UVS - 202202094002 ] QSD5731-IR, suggested repeater solution for use with GV-PA902BT & GV-PA903BT