[ AS Hardware ] How to distinguish the max. event log is 50000(FR Panel-5) or 100000(FR Panel-10)? from FR Panel.
Posted: August 11th, 2021, 3:42 pm
Applied to
GV-FR Panel V1.2.0 or later
Introduction
How to distinguish the max. event log is 50000(FR Panel-5) or 100000(FR Panel-10)? from FR Panel.
Solution
You may check it by the following ways:
1. From material numbers or barcode.
2. From FR panel host device: you may check the FW ver. to see if it's FR Panel-5 or FR Panel-10.
3. From IP Device Utility NOTE to see if it's FR Panel-5 or FR Panel-10.
GV-FR Panel V1.2.0 or later
Introduction
How to distinguish the max. event log is 50000(FR Panel-5) or 100000(FR Panel-10)? from FR Panel.
Solution
You may check it by the following ways:
1. From material numbers or barcode.
- bard code.jpg (44.06 KiB) Viewed 2777 times
2. From FR panel host device: you may check the FW ver. to see if it's FR Panel-5 or FR Panel-10.
- host device.jpg (28.24 KiB) Viewed 2821 times
3. From IP Device Utility NOTE to see if it's FR Panel-5 or FR Panel-10.
- IP Device Utility.jpg (44.81 KiB) Viewed 2821 times