[ NVR ] A/T and EBD series Camera Relay Mode Bistable and Monostable with NVR I/O, IP Camera Install – 20201123
Posted: December 4th, 2020, 11:19 am
Issue:
NVR v8.9.1 and former connect to A/T and EBD series model with I/O. After close IP Camera Install or other UI modification, I/O will be triggered.
Answer:
Access to your Camera Web Page and change Relay Mode to Bistable(default is Monostable) for test.
Reference:
[ 3rd Eye Surveillance - 202011124001 ] NVR v8.8.0.26 if you go to IP camera install and close the IP device window, the light in channel 23 will , I/O trigger, AVD4710 F/W v1.04 Bistable
NVR v8.9.1 and former connect to A/T and EBD series model with I/O. After close IP Camera Install or other UI modification, I/O will be triggered.
Answer:
Access to your Camera Web Page and change Relay Mode to Bistable(default is Monostable) for test.
- 001.png (62.98 KiB) Viewed 3058 times
[ 3rd Eye Surveillance - 202011124001 ] NVR v8.8.0.26 if you go to IP camera install and close the IP device window, the light in channel 23 will , I/O trigger, AVD4710 F/W v1.04 Bistable