[ Control Center ] v3.8 CPU increases with several Fisheye Dewarping Cameras at Matrix full screen (F key) - 20201117
Posted: November 18th, 2020, 9:37 am
Issue:
Control Center v3.8 CPU increases considerably with several Fisheye Dewarping Cameras at Matrix full screen mode (F key).
Here you can see before Matrix full screen mode (F key), Fisheye Dewarping channels are second stream.
After enable Matrix full screen mode (F key), Fisheye Dewarping channels will be first stream leading to CPU increases.
Patch / Procedure ( GV-ControlCenter_V3.8.0.2.zip ):
1. Disable remote service on GV-ControlCenter.
2. Close GV-ControlCenter and other GeoVision software.
3. Download the patch file from the following link.
http://54.200.75.24/english/EncodeUrl3. ... .8.0.2.zip
4. Unzip the downloaded file.
5. Double-click the GV-ControlCenter_V3.8.0.2 program.
6. Restart GV-ControlCenter.
Reference:
[ Polvision - 202010264004 ] Control Center v3.8 Matrix full screen mode (F key) Fisheye Dewarping channel will be stream 1 leading to CPU will be 100% from VMS v17.3.1, Intel(R) Core(TM) i7-9700 CPU
Control Center v3.8 CPU increases considerably with several Fisheye Dewarping Cameras at Matrix full screen mode (F key).
Here you can see before Matrix full screen mode (F key), Fisheye Dewarping channels are second stream.
- 001.PNG (444.8 KiB) Viewed 3605 times
- 002.PNG (414.12 KiB) Viewed 3605 times
1. Disable remote service on GV-ControlCenter.
2. Close GV-ControlCenter and other GeoVision software.
3. Download the patch file from the following link.
http://54.200.75.24/english/EncodeUrl3. ... .8.0.2.zip
4. Unzip the downloaded file.
5. Double-click the GV-ControlCenter_V3.8.0.2 program.
6. Restart GV-ControlCenter.
Reference:
[ Polvision - 202010264004 ] Control Center v3.8 Matrix full screen mode (F key) Fisheye Dewarping channel will be stream 1 leading to CPU will be 100% from VMS v17.3.1, Intel(R) Core(TM) i7-9700 CPU