[ ERM ] Connecting ERM to VMS - 20191127
Posted: November 27th, 2019, 5:38 pm
1. To add GV-DVR / NVR / VMS hosts, make sure that Control Center Service and Remote ViewLog Service are enabled ahead to allow remote access from GV-Edge Recording Manager (Network button > Control Center Server > Start Default Service).
1. Execute the GV-Edge Recording Manager program.
2. Upon first startup, GV-Edge Recording Manager automatically searches for the GV-IP Devices and the servers installed with GeoVision software that are under the same LAN.
3. When the search is finished, you are prompted to select hosts. Click OK to proceed.
4. Select a desired host by checking the box . This dialog box appears.
5. Type the ID and password of the device and click OK.
6. Repeat steps 4 and 5 to select more hosts. The selected hosts are indicated with a green plus sign.
7. Click the Add Selected Hosts button. When the hosts are added to the Host List, you are prompted with a message.
8. Click OK and click Next Step. You are prompted to display the added hosts to live view.
9. Click OK and the live view windows will be filled with channels from added hosts
- 2019-11-27_17h28_43.jpg (16.05 KiB) Viewed 4267 times
1. Execute the GV-Edge Recording Manager program.
2. Upon first startup, GV-Edge Recording Manager automatically searches for the GV-IP Devices and the servers installed with GeoVision software that are under the same LAN.
- 2019-11-27_17h29_33.jpg (128.92 KiB) Viewed 4267 times
3. When the search is finished, you are prompted to select hosts. Click OK to proceed.
4. Select a desired host by checking the box . This dialog box appears.
5. Type the ID and password of the device and click OK.
- 2019-11-27_17h29_40.jpg (25.16 KiB) Viewed 4267 times
6. Repeat steps 4 and 5 to select more hosts. The selected hosts are indicated with a green plus sign.
- 2019-11-27_17h31_34.jpg (147.4 KiB) Viewed 4267 times
7. Click the Add Selected Hosts button. When the hosts are added to the Host List, you are prompted with a message.
- 2019-11-27_17h31_42.jpg (132.83 KiB) Viewed 4267 times
8. Click OK and click Next Step. You are prompted to display the added hosts to live view.
9. Click OK and the live view windows will be filled with channels from added hosts
- 2019-11-27_17h31_53.jpg (15.24 KiB) Viewed 4267 times