[DVR/NVR] Can GV-System, GV-Center V2 and GV-VSM receive tampering events from GV-IP Camera or GV-VS?
Posted: December 30th, 2014, 3:09 pm
Applied to
GV-IP Camera, GV-Video Server, GV-System, GV-Center V2, GV-VSM
Question
Can GV-System, GV-Center V2 or GV-VSM receive notifications when tampering alarm
events from the host GV-IP Camera or GV-Video Server?
Answer
Yes. As long as the tampering alarm function is enabled on the GV-IP Camera or GV-Video
Server (Figure 1) and the device is properly connected to GV-System, GV-Center V2 or
GV-VSM, notifications will be sent when tampering alarm events occur. Figure 2 is an
example of GV-System receiving tampering alarm notifications (log events).
GV-IP Camera, GV-Video Server, GV-System, GV-Center V2, GV-VSM
Question
Can GV-System, GV-Center V2 or GV-VSM receive notifications when tampering alarm
events from the host GV-IP Camera or GV-Video Server?
Answer
Yes. As long as the tampering alarm function is enabled on the GV-IP Camera or GV-Video
Server (Figure 1) and the device is properly connected to GV-System, GV-Center V2 or
GV-VSM, notifications will be sent when tampering alarm events occur. Figure 2 is an
example of GV-System receiving tampering alarm notifications (log events).
tampering_alarm_notification.pdf- (349.13 KiB) Downloaded 420 times