[ ASManager ] Security Mode (Armed Mode) demo - 20190621
Posted: June 21st, 2019, 7:13 pm
Summary:
During the Security Mode (Armed Mode), no cards can be granted access. To enable the Security Mode (Armed Mode), you
need to define the output and input functions of a GV-AS21 / 41 / 81 series Controller and add
a Security Card on GV-ASManager. After the setup is complete, present a security card and
then enter the respective PIN code on the reader to arm or disarm the unit.
Required Device:
Compatible cards (13.56 MHz for ISO14443A, Mifare DESFire, Mifare Plus and Mifare Classic),
RK1352 *1 and GV-AS21 / 41 / 81 series Controller *1 are needed under the same LAN as is a working PC.
Structure:
Defining the Output / Input Function:
1. On the web interface of GV-AS21 / 41 / 81 series Controller, in Output Configuration page, set Out1 to Door 1: Alarm Keyswitch, then click Submit.
2. in Input Configuration page, set IN1 to Normal Input and enable Latch, then click Submit.
3. Back in Output Configuration page, set Out2 to Toggle and Input 01 as its condition, then click Submit.
4. Back in Input Configuration page, set Out2 to Door 1: Armed Status, then click Submit.
After defining the Output / Input Function,
You may add Security Cards (for an assigned group of people)by following the instruction in P.5 of the dedicated technical notice via the link below,
https://s3.amazonaws.com/geovision_down ... d_Mode.pdf
as well as how to disable Armed Mode and the other detail.
Reference:
[ UVS - 201906037003 ] Inquiry for feasibility of Access Control Feature, Armed Mode
ASManager Security Mode integrate with 3rd party Intruder Alarm System.
https://s3.amazonaws.com/geovision_down ... d_Mode.pdf
During the Security Mode (Armed Mode), no cards can be granted access. To enable the Security Mode (Armed Mode), you
need to define the output and input functions of a GV-AS21 / 41 / 81 series Controller and add
a Security Card on GV-ASManager. After the setup is complete, present a security card and
then enter the respective PIN code on the reader to arm or disarm the unit.
Required Device:
Compatible cards (13.56 MHz for ISO14443A, Mifare DESFire, Mifare Plus and Mifare Classic),
RK1352 *1 and GV-AS21 / 41 / 81 series Controller *1 are needed under the same LAN as is a working PC.
Structure:
- 006.png (56.49 KiB) Viewed 3340 times
1. On the web interface of GV-AS21 / 41 / 81 series Controller, in Output Configuration page, set Out1 to Door 1: Alarm Keyswitch, then click Submit.
2. in Input Configuration page, set IN1 to Normal Input and enable Latch, then click Submit.
3. Back in Output Configuration page, set Out2 to Toggle and Input 01 as its condition, then click Submit.
4. Back in Input Configuration page, set Out2 to Door 1: Armed Status, then click Submit.
- 004.png (15.63 KiB) Viewed 3342 times
- 005.png (8.95 KiB) Viewed 3342 times
You may add Security Cards (for an assigned group of people)by following the instruction in P.5 of the dedicated technical notice via the link below,
https://s3.amazonaws.com/geovision_down ... d_Mode.pdf
as well as how to disable Armed Mode and the other detail.
Reference:
[ UVS - 201906037003 ] Inquiry for feasibility of Access Control Feature, Armed Mode
ASManager Security Mode integrate with 3rd party Intruder Alarm System.
https://s3.amazonaws.com/geovision_down ... d_Mode.pdf