[Technical Notice] Recommended Stream 2 Settings for Mobile Phone Connection

[alexhon]

Article ID: GV12-12-05-25
Released Date: 05/25/2012



Applied to
GV-Eye V1.0 for Android
GV-NVR
GV-IP Devices

Introduction
To get smoother and better live images on GV-Eye, it is recommended to have the following Stream 2 (live view) settings on the GV-IP devices.

Screenshot_1.jpg (21.05 KiB) Viewed 4741 times

If the GV-IP device is also connected to the GV-DVR / NVR, the stream settings set on the GV-DVR / NVR will override those set on the Web interface of the device. Therefore, you need to make the above settings on the GV-DVR / NVR instead.

Instructions

1. Change Stream 2 settings on the Web interface of the GV-IP device

1. Log in the Web interface of the GV-IP device.
2. Select Streaming 2 from the left menu.
3. Select MJPEG from the Video Format drop-down list, and set Resolution to 640 x 480, 640 x 512 or 640 x 360.

   

   Screenshot_2.jpg (50.09 KiB) Viewed 4741 times

2. Change Stream 2 settings on the GV-DVR / NVR
If the GV-IP device is connecting to GV-DVR / NVR, you need to change the stream 2 (live view) settings on the GV-DVR / NVR instead of the GV-IP device.

1. On the GV-DVR / NVR, click the Configure button, select System Configure, select Camera Install and select IP Camera Install. The IP Device Setup dialog box appears.
2. Select the desired IP device in the list, right-click the device to display a menu, and select Change Resolution.

   

   Screenshot_4.jpg (39.44 KiB) Viewed 4741 times

3. Select an aspect ratio, and select 640 x 480, 640 x 360 or 640 x 512 in the Preview drop-down list.

   

   Screenshot_5.jpg (19.37 KiB) Viewed 4741 times

4. Select the desired IP device in the list, right-click to display a menu, select Change live view codec and select JPEG.

   

   Screenshot_6.jpg (39.98 KiB) Viewed 4741 times

5. The changes you made on the resolution and codec are reflected on the IP Device Setup dialog box.

   

   Screenshot_7.jpg (27.41 KiB) Viewed 4741 times

3. Switch to Stream 2 on GV-Eye mobile application
After you are connected to the GV-IP device using GV-Eye V1.0 for Android, you need to click the button to switch to Stream 2 for a better and smoother live viewing.

Screenshot_8.jpg (31.96 KiB) Viewed 4741 times

Note: Currently, GV-Eye HD V1.1.2 for iPad and GV-Eye V1.1.2 for iPhone and iPod Touch do not support the Stream 2 function.