GV FAE Knowledge

Article ID: GV3-13-06-11-n
Released Date: 06/11/2013



Applied to
GV-IP Camera V2.01 or later
Axxon Next V3.10

Instructions
Using ONVIF or PSIA protocol, GV-IP Camera can be added to Axxon’s surveillance software, Axxon Next. To add GV-IP Camera to Axxon Next, follow the steps below:

1. Run the Axxon Next program and type the Username and Password to log in.

   

   Screenshot_1.jpg (18.03 KiB) Viewed 1724 times

2. After logging into the Web interface, click the Settings button at the upper-right corner.

   

   Screenshot_2.jpg (20.95 KiB) Viewed 1724 times

3. Under the list of devices, right-click the host computer and select Add IP-device.

   

   Screenshot_3.jpg (42.77 KiB) Viewed 1724 times

4. Under New camera, type the IP Address of the GV-IP Camera.

   

   Screenshot_4.jpg (31.83 KiB) Viewed 1724 times

   Tip: If you want the device name to be displayed under the list of devices, type the device name of the GV-IP Camera as well.
5. Under Device type, select ONVIF or PSIA in the Manufacturer drop-down list and click the Apply button to save the setting.

   

   Screenshot_5.jpg (36.9 KiB) Viewed 1724 times

6. Under Authentication, type the Login name and Password of the GV-IP Camera.

   

   Screenshot_6.jpg (54.52 KiB) Viewed 1724 times

7. Click Apply. The live view is displayed.

   

   Screenshot_7.jpg (52.04 KiB) Viewed 1724 times

Enabling Audio Function
The audio function is disabled by default on GV-IP Camera V2.06 or later. To allow Axxon Next to access the GV-IP Camera with audio function, you need to manually enable the audio function on the Web interface of the GV-IP Camera.

1. Start the Internet Explorer browser, and type the IP address of the GV-IP Camera.
2. Type the login name and password, and click Apply to log in.

   

   Screenshot_8.jpg (25.21 KiB) Viewed 1724 times

3. In the left menu, select RTSP under Events and Alerts and select Enable Audio. Click Apply to activate the setting.

   

   Screenshot_9.jpg (27.97 KiB) Viewed 1724 times