[Technical Notice] Accessing GV-IP Cameras from Aimetis Surveillance Software

[alexhon]

Article ID: GV3-13-06-11-n
Release Date: 06/11/2013



Applied to
GV-IP Camera V2.07 or later
Aimetis Symphony V6.11

Summary
This document covers the basic instruction on adding GV-IP Cameras to Aimetis surveillance system using ONVIF protocols.

Instruction

1. Run the Aimetis Symphony program, and click the Configuration button on the Toolbar.

   

   Screenshot_1.jpg (19.32 KiB) Viewed 1830 times

2. Find Devices on the left menu and click the New button. Camera1 is created in the device list.

   

   Screenshot_2.jpg (25.86 KiB) Viewed 1830 times

3. Under the Network tab, select ONVIF in the Manufacturer field. Type the IP Address, username and password of the GV-IP Camera, and click Connect to Camera.

   

   Screenshot_3.jpg (37.15 KiB) Viewed 1830 times

   Tip: If you want the device name to be displayed under the device list, type the device name of the GV-IP Camera in the Name column as well.
4. Upon connection, the system will show the model name and video information of the GV-IP Camera. Click OK to add the camera.

   

   Screenshot_4.jpg (26.37 KiB) Viewed 1830 times

5. On the main page, double-click the added GV-IP Camera under the device list at the upper-right corner. The live view is displayed.

   

   Screenshot_5.jpg (39.05 KiB) Viewed 1830 times

   Note: Aimetis Symphony does not support audio function.