[Technical Notice] Accessing GV-IP Cameras from NUUO Surveillance Software

[alexhon]

Article ID: GV3-13-07-02-k
Released Date: 07/02/2013



Applied to
GV-IP Camera V2.07 or later
NUUO V4.1.0

Summary
This document covers the basic instruction on adding GV-IP Cameras to NUUO surveillance system using ONVIF protocols.

Instruction

1. Type User Name and Password to log in the NUUO surveillance software.

   

   Screenshot_1.jpg (21.42 KiB) Viewed 1694 times

2. Click the tool icon, select Setting and select System Setting.

   

   Screenshot_2.jpg (25.79 KiB) Viewed 1694 times

3. Select the Camera tab and click Insert to add a GV-IP Camera.

   

   Screenshot_3.jpg (19 KiB) Viewed 1694 times

4. Type the User Name and IP Address. Select TCP for Protocol. In the Device section, select ONVIF for Vendor and Camera Model. Click OK.

   

   Screenshot_4.jpg (31.52 KiB) Viewed 1694 times

5. When you see the live view from this window below, click OK to complete the settings.

   

   Screenshot_5.jpg (38.57 KiB) Viewed 1694 times