GV FAE Knowledge

Article ID: GV40-12-07-09-t-revised
Release Date: 09/10/2012


Summary
Using PSIA protocols, third-party surveillance software can connect to GV-IP Cameras to access live view. This document covers the basic instructions on adding GV-IP Cameras to the following third-party surveillance software:

• Axxon Smart 2.1.6
• Milestone XProtect Enterprise 8.0C
• QNap VioStor V3.5.2
• Synology Disk Station Manager 3.2

Note: The instructions are based on GV-IP Cameras V1.15 and third-party surveillance software of the versions listed above.

1. Accessing GV-IP Cameras from Axxon Smart
To allow Axxon Smart to access GV-IP Cameras through PSIA, you must first change the RTSP port to 554 on the Web interface of the GV-IP Camera before adding the camera to Axxon Smart.

1. Start the Internet Explorer browser, and type the IP address of the GV-IP Camera.
2. Type the login name and password, and click Apply to log in.

   

   Screenshot_1.jpg (27.56 KiB) Viewed 3150 times

3. In the left menu, select RTSP under Events and Alerts and change the RTSP / TCP port to 554. Click Apply.

   

   Screenshot_2.jpg (34.44 KiB) Viewed 3150 times

4. Run the Axxon Smart program and type the Username and Password to log in.

   

   Screenshot_3.jpg (14.75 KiB) Viewed 3150 times

5. Click the Settings button in the upper-right corner.

   

   Screenshot_4.jpg (18.15 KiB) Viewed 3150 times

6. Under the list of devices, right-click the host computer and select Add IP device.

   

   Screenshot_5.jpg (46.09 KiB) Viewed 3150 times

7. Under New camera, type the IP Address and device Name of the GV-IP Camera.

   

   Screenshot_6.jpg (34.6 KiB) Viewed 3150 times

8. Under Device type, select PSIA in the Produced by drop-down list and click the Apply button.

   

   Screenshot_7.jpg (40.83 KiB) Viewed 3150 times

9. Under Authentication, type the Login name and Password of the camera.

   

   Screenshot_8.jpg (64.17 KiB) Viewed 3150 times

10. Click Apply and the live view will be displayed.

    

    Screenshot_9.jpg (53.02 KiB) Viewed 3150 times

2. Accessing GV-IP Cameras from Milestone XProtect
Follow the steps below to add GV-IP Camera to Milestone XProtect Management Application.

1. Start the Milestone XProtect Management Application and select Add Hardware Devices.

   

   Screenshot_10.jpg (40.31 KiB) Viewed 3150 times

2. Under Hardware device detection method, select Manual and click Next.

   

   Screenshot_11.jpg (25.23 KiB) Viewed 3150 times

3. Type the IP Address, User Name and Password of the GV-IP Cameras.

   

   Screenshot_12.jpg (38.31 KiB) Viewed 3150 times

4. Use one of the methods below to add the GV-IP Camera:
   1. Use the Hardware Driver drop-down list to select Auto-detect hardware type and click Auto-detect.
   2. Use the Hardware Driver drop-down list to select PSIA Conformant Device and click Next.

   

   Screenshot_13.jpg (36.44 KiB) Viewed 3150 times

5. In the left menu, click Advanced Configuration, Hardware Devices, Hardware Device 1 and select the GV-IP Camera you just added. The live view of the camera will be displayed.

   

   Screenshot_14.jpg (51.36 KiB) Viewed 3150 times

3. Accessing GV-IP Cameras from QNap VioStor
Follow the steps below to add GV-IP Camera to QNap VioStor.

1. Start the Internet Explorer browser, and type the IP address of the QNap VioStor.
2. Type the login name and password of the QNap VioStor to log in.
3. Right-click a channel and select Camera Settings.

   

   Screenshot_15.jpg (28.87 KiB) Viewed 3150 times

4. In the Camera Configuration page, select a Camera Number.

   

   Screenshot_16.jpg (43.2 KiB) Viewed 3150 times

5. Under Camera Brand, select PSIA.
6. Under Camera Model, select PSIA Cameras.
7. Type the IP Address of the GV-IP Camera.
8. Type the User Name and Password of the GV-IP Camera.
9. Click Apply and click the Monitor button in the top-right corner to access the live view.

   

   Screenshot_17.jpg (35.17 KiB) Viewed 3150 times

4. Accessing GV-IP Cameras from Synology Surveillance Station
Follow the steps below to add GV-IP Camera to Synology Surveillance Station.

1. Start the Internet Explorer browser, and type the IP address of the Synology Surveillance Station.
2. Type the ID and password to log in.
3. Click the Surveillance Station icon. This window appears.

   

   Screenshot_19.jpg (32.39 KiB) Viewed 3150 times

4. Click the Add button, select Quick Setup and click Next. This dialog box appears.

   

   Screenshot_21.jpg (23.48 KiB) Viewed 3150 times

5. Type a camera Name and the IP address of the GV-IP Camera.
6. Under the Brand drop-down list, select PSIA.
7. Type the Username and Password of the GV-IP Camera.
8. Click Finish. The GV-IP Camera is now listed.

   

   Screenshot_22.jpg (28.94 KiB) Viewed 3150 times

9. Click the Live View tab to access the live view of the GV-IP Camera.

   

   Screenshot_23.jpg (36.49 KiB) Viewed 3150 times