[Technical Notice] GV-FER12203 Integration Notes for GV-VMS V15.10.1 and GV-DVR / NVR V8.6.2

DVR/NVR/Hybrid/VMS
alexhon

[Technical Notice] GV-FER12203 Integration Notes for GV-VMS V15.10.1 and GV-DVR / NVR V8.6.2

Unread post by alexhon »

Article ID: GV1-16-02-23-b
Released Date: 02/23/2016


Applied to
GV-VMS V15.10.1
GV-VMS V14.10.1
GV-DVR/NVR V8.6.2

Summary
The document consists of three sections:
  1. The total frame rate and the number of channels GV-DVR/NVR/VMS can support without fisheye dewarping
  2. The total frame rate and the number of channels GV-DVR/NVR/VMS can support with fisheye dewarping
  3. The total frame rate and the number of channels GV-DVR/NVR/VMS can support with fisheye dewarping when the frame rate is limited to 2 fps per
  4. channel
Please note the following specifications pertaining to the integration of GV-FER12203 and GV-DVR/NVR/VMS:
  1. The frame rate for GV-FER12203 is 15 fps at 4000 x 3000.
  2. GV-DVR/NVR V8.6.2 and GV-VMS V14.10.1 only support single stream. GV-VMS V15.10 or later supports dual streams.
  3. For GPU decoding, it is required to use Intel Ivy Bridge or Haswell Chipsets for decoding. For better performance, it is not recommended to use single stream with CPU decoding.
  4. To support GPU dewarping of fisheye views, the graphics card must support DirectX 10.1 or above.
1. Total Frame Rate and Number of Channels Supported
The tables below show the total frame rates and number of full-frame channels GV-DVR/NVR/VMS can support for GV-FER12203.

The following tables are available:
  • Table 1: Dual Streams with GPU Decoding
  • Table 2: Dual Streams with CPU Decoding
  • Table 3: Single Stream with GPU Decoding
When GV-FER12203 is set to dual streams, the total frame rate supported is increased because the lower resolution (640 x 480) is used for live view and the higher resolution (4000 x 3000) is used for recording. Therefore, the total frame rate supported for dual streams is much higher than that of single stream.

Table 1: Dual Streams with GPU Decoding
Screenshot_1.jpg
Screenshot_1.jpg (23.71 KiB) Viewed 1610 times
Table 2: Dual Streams with CPU Decoding
Screenshot_2.jpg
Screenshot_2.jpg (22.61 KiB) Viewed 1610 times
Table 3: Single Stream with GPU Decoding
Screenshot_3.jpg
Screenshot_3.jpg (35.85 KiB) Viewed 1610 times
2. Total Frame Rate and Number of Channels Supported for Fisheye Dewarping
When fisheye dewarping is activated, the total frame rates and number of channels GV-DVR/NVR/VMS can support are affected accordingly. The tables below show the total frame rates and number of channels GV-DVR/NVR/VMS can support when fisheye dewarping is activated.

The following tables are available:
  • Table 1: Dual Streams with GPU Dewarping
  • Table 2: Single Stream with GPU Dewarping
Table 1: Dual Streams with GPU Dewarping
Screenshot_4.jpg
Screenshot_4.jpg (22.21 KiB) Viewed 1610 times
Table 2: Single Stream with GPU Dewarping
Screenshot_5.jpg
Screenshot_5.jpg (34.53 KiB) Viewed 1610 times
Note:The test data is obtained using the following conditions:
  • Built-in VGA
  • CPU usage at around 70%
  • 360 Degree view mode with “Auto Pan” function disabled
  • GV-VMS: 64-screen divisions (8 x 8) with the panel resolution set to 1920 x 1080
  • GV-DVR/NVR: 36-screen divisions (6 x 6) with the panel resolution set to 1920 x 1080


3. Total Frame Rate and Number of Channels Supported for Fisheye Dewarping (Frame Rate Limited to 2 FPS)
The higher the frame rate, the lower the total number of channels, and vice versa. Therefore, in order to have a larger number of channels, you can limit the number of frame rates per channel. The tables below show the total frame rates and number of channels GV-DVR/NVR/VMS can support when the frame rate is limited to 2 FPS, while fisheye dewarping is activated.

The following tables are available:
  • Table 1: Dual Streams with GPU Dewarping
  • Table 2: Single Stream with GPU Dewarping
Table 1: Dual Streams with GPU Dewarping
Screenshot_6.jpg
Screenshot_6.jpg (23.66 KiB) Viewed 1610 times
Table 2: Single Stream with GPU Dewarping
Screenshot_7.jpg
Screenshot_7.jpg (35.84 KiB) Viewed 1610 times
Note:The test data is obtained using the following conditions:
  • Built-in VGA
  • CPU usage at around 70%
  • 360 Degree view mode with “Auto Pan” function disabled
  • GV-VMS: 64-screen divisions (8 x 8) with the panel resolution set to 1920 x 1080
  • GV-DVR/NVR: 36-screen divisions (6 x 6) with the panel resolution set to 1920 x 1080


4. Test Environment
The total frame rate and number of total channels supported were obtained using the following bitrate and test PC.
Screenshot_9.jpg
Screenshot_9.jpg (59.82 KiB) Viewed 1610 times
Post Reply