[Technical Notice] Detection Issue of GV-I/O Box on GV-Control Center
Posted: September 4th, 2018, 11:45 am
Article ID: GV2-14-01-28-t
Released Date: 01/28/2014
Applied to
GV-Control Center
GV-I/O Box (8 ports and 16 ports)
Symptom
When a GV-I/O Box (8 ports or 16 ports) is connected to GV-Control Center through network, the input and output modules will not appear on GV-Control Center’s I/O Central Panel.
Solution
To resolve the issue, upgrade the firmware of your GV-I/O Box (8 ports or 16 ports) to the latest firmware.
Released Date: 01/28/2014
Applied to
GV-Control Center
GV-I/O Box (8 ports and 16 ports)
Symptom
When a GV-I/O Box (8 ports or 16 ports) is connected to GV-Control Center through network, the input and output modules will not appear on GV-Control Center’s I/O Central Panel.
- Issue_1.jpg (50.14 KiB) Viewed 3505 times
To resolve the issue, upgrade the firmware of your GV-I/O Box (8 ports or 16 ports) to the latest firmware.
- Download the latest firmware from the company website and unzip the file.
- GV-I/O Box 8 ports: http://www.geovision.com.tw/download/pr ... 08%20Ports
- GV-I/O Box 16 ports: http://www.geovision.com.tw/download/pr ... 16%20Ports
- Access the Web interface of the GV-I/O Box by typing its IP address in a Web browser. The default IP address is 192.169.0.100.
- Type the Username and Password to log in. The default username and password are both admin.
- In the left menu, select Firmware Update. This page appears.
- Issue_2.jpg (37.58 KiB) Viewed 3505 times
- Click the Browse button and locate the firmware file (*.bin).
- Click the Upload button. The update procedure may take 60 seconds to complete.
- When the update is complete, a dialog box appears and asks you to reboot the system. Click OK. GV-I/O Box will start to reboot.