[Technical Notice] Unable to Upgrade Firmware for GV-IO Box 8 / 16 Ports on Windows 10

[alexhon]

Article ID: GV5-18-01-17-Ch
Released Date: 01/17/2018


Applied to
GV-IO Box 8 Ports Firmware V1.10 or earlier
GV-IO Box 16 Ports Firmware V1.10 or earlier

Symptom
The firmware of GV-IO Box 8 / 16 Ports may fail to be upgraded, either through its Web interface or GV-Net Module Utility, when using
Windows 10.

Screenshot_1.jpg (20.45 KiB) Viewed 2961 times

Figure: The status of the GV-IO Box on GV-Net Module Utility is shown as “Firmware update failed” when trying to upgrade its firmware.

Solution
The above-mentioned symptom may be due to a compatibility issue. To resolve this, follow the steps below.

1. Reboot your GV-IO Box 8 / 16 Ports.
2. Upgrade the firmware of your GV-IO Box, through its Web interface or GV-Net Module Utility, on either Windows XP or Windows 7.
3. Restart GV-IO Box 8 / 16 Ports.

Note:

1. You can download GV-Net Module Utility from the link below:
   http://54.200.75.24/english/EncodeUrl3. ... _Setup.zip
2. You can download the latest firmware of GV-IO Box 8 / 16 Ports from the product download page:
   http://www.geovision.com.tw/download/pr ... 08%20Ports